diff --git a/MAKEALL b/MAKEALL
index e706797..61a4d45 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -91,7 +91,7 @@
 	PPChameleonEVB  sbc405          sc3		sequoia		\
 	sequoia_nand    taishan         VOH405		VOM405		\
 	W7OLMC          W7OLMG          walnut		WUH405		\
-	XPEDITE1K       yellowstone     yosemite	yucca						\
+	XPEDITE1K       yellowstone     yosemite	yucca		\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 04c2c02..8282c71 100644
--- a/Makefile
+++ b/Makefile
@@ -1040,7 +1040,7 @@
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
 
 alpr_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
 
 AP1000_config:unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
@@ -1135,10 +1135,10 @@
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
 
 hcu4_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx hcu4 netstal
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
 
 hcu5_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx hcu5 netstal
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
 
 HH405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
@@ -1258,7 +1258,7 @@
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
 sc3_config:unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx sc3
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
 
 taishan_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
diff --git a/board/netstal/common/nm_bsp.c b/board/netstal/common/nm_bsp.c
index ee1b684..1e06780 100644
--- a/board/netstal/common/nm_bsp.c
+++ b/board/netstal/common/nm_bsp.c
@@ -39,4 +39,3 @@
 	  "Help for Netstal Maschinen BSP specific command.\n"
 	  );
 #endif
-
diff --git a/board/netstal/hcu4/config.mk b/board/netstal/hcu4/config.mk
index f5a4ce4..376609a 100644
--- a/board/netstal/hcu4/config.mk
+++ b/board/netstal/hcu4/config.mk
@@ -26,4 +26,3 @@
 ifeq ($(debug),1)
 PLATFORM_CPPFLAGS += -DDEBUG -g
 endif
-
diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c
index deb7d2d..252aaa7 100644
--- a/board/netstal/hcu4/hcu4.c
+++ b/board/netstal/hcu4/hcu4.c
@@ -27,10 +27,30 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define HCU_MACH_VERSIONS_REGISTER	(0x7C000000 + 0xF00000)
+
+#define mtsdram(reg, data)  { mtdcr(memcfga,reg);mtdcr(memcfgd,data); }
+#define mfsdram(value, reg) { mtdcr(memcfga,reg); value = mfdcr(memcfgd); }
+
+#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */
+
+#define DO_UGLY_SDRAM_WORKAROUND
+
+enum {
+	/* HW_GENERATION_HCU wird nicht mehr unterstuetzt */
+	HW_GENERATION_HCU2  = 0x10,
+	HW_GENERATION_HCU3  = 0x10,
+	HW_GENERATION_HCU4  = 0x20,
+	HW_GENERATION_MCU   = 0x08,
+	HW_GENERATION_MCU20 = 0x0a,
+	HW_GENERATION_MCU25 = 0x09,
+};
+
 void sysLedSet(u32 value);
-long int spd_sdram(int(read_spd)(uint addr))
+long int spd_sdram(int(read_spd)(uint addr));
+
 #ifdef CONFIG_SPD_EEPROM
-	#define DEBUG
+#define DEBUG
 #endif
 
 #if defined(DEBUG)
@@ -86,26 +106,15 @@
 {
 	return board_early_init_f ();
 }
-
 #endif
 
-enum {
-	/* HW_GENERATION_HCU wird nicht mehr unterstuetzt */
-	HW_GENERATION_HCU2  = 0x10,
-	HW_GENERATION_HCU3  = 0x10,
-	HW_GENERATION_HCU4  = 0x20,
-	HW_GENERATION_MCU   = 0x08,
-	HW_GENERATION_MCU20 = 0x0a,
-	HW_GENERATION_MCU25 = 0x09,
-};
-
 int checkboard (void)
 {
-#define HCU_MACH_VERSIONS_REGISTER ( 0x7C000000 + 0xF00000 )
-	unsigned j;
-	uint16_t *boardVersReg = (uint16_t *) HCU_MACH_VERSIONS_REGISTER;
-	uint16_t generation = *boardVersReg & 0xf0;
-	uint16_t index      = *boardVersReg & 0x0f;
+	unsigned int j;
+	u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER;
+	u16 generation = *boardVersReg & 0xf0;
+	u16 index      = *boardVersReg & 0x0f;
+
 	/* Force /RTS to active. The board it not wired quite
 	   correctly to use cts/rtc flow control, so just force the
 	   /RST active and forget about it. */
@@ -117,24 +126,26 @@
 		printf ("HCU4: index %d\n\n", index);
 	/* GPIO here noch nicht richtig initialisert !!! */
 	sysLedSet(0);
-	for (j=0; j < 7;j++) {
+	for (j = 0; j < 7; j++) {
 		sysLedSet(1 << j);
-		udelay(50*1000);
+		udelay(50 * 1000);
 	}
+
 	return 0;
 }
 
 u32 sysLedGet(void)
 {
-	return( ~( (*(u32 *)GPIO0_OR)) >> 23) & 0xff;
+	return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff;
 }
 
 void sysLedSet(u32 value /* value to place in LEDs */)
 {
 	u32   tmp = ~value;
 	u32   *ledReg;
-	tmp  = (tmp << 23) | 0x7FFFFF;
-	ledReg = (u32   *)GPIO0_OR;
+
+	tmp = (tmp << 23) | 0x7FFFFF;
+	ledReg = (u32 *)GPIO0_OR;
 	*ledReg = tmp;
 }
 
@@ -147,13 +158,11 @@
 	return;
 }
 
-#define mtsdram(reg, data)  { mtdcr(memcfga,reg);mtdcr(memcfgd,data); }
-#define mfsdram(value, reg) { mtdcr(memcfga,reg); value = mfdcr(memcfgd); }
-
 #if defined(DEBUG)
 void show_sdram_registers(void)
 {
 	u32 value;
+
 	printf ("SDRAM Controller Registers --\n");
 	mfsdram(value, mem_mcopt1);
 	printf ("    SDRAM0_CFG   : 0x%08x\n", value);
@@ -170,8 +179,6 @@
 }
 #endif
 
-#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */
-
 /*
  * this is even after checkboard. It returns the size of the SDRAM
  * that we have installed. This function is called by board_init_f
@@ -244,9 +251,10 @@
 static u32 getSerialNr(void)
 {
 	u32 *serial = (u32 *)CFG_FLASH_BASE;
-	if (*serial == 0xffffffff) {
+
+	if (*serial == 0xffffffff)
 		return get_ticks();
-	}
+
 	return *serial;
 }
 
@@ -260,12 +268,14 @@
 	char *s = getenv("ethaddr");
 	char *e;
 	int i;
-	u32 serial =  getSerialNr();
+	u32 serial = getSerialNr();
+
 	for (i = 0; i < 6; ++i) {
 		gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
 		if (s)
 			s = (*e) ? e + 1 : e;
 	}
+
 	if (gd->bd->bi_enetaddr[3] == 0 &&
 	    gd->bd->bi_enetaddr[4] == 0 &&
 	    gd->bd->bi_enetaddr[5] == 0) {
@@ -288,13 +298,14 @@
 	return 0;
 }
 
-#define DO_UGLY_SDRAM_WORKAROUND
 #ifdef  DO_UGLY_SDRAM_WORKAROUND
-	#include "i2c.h"
+#include "i2c.h"
+
 void set_spd_default_value(unsigned int spd_addr,uchar def_val)
 {
 	uchar value;
 	int res = i2c_read(SPD_EEPROM_ADDRESS, spd_addr, 1, &value, 1) ;
+
 	if (res == 0 && value == 0xff) {
 		res = i2c_write(SPD_EEPROM_ADDRESS,
 				spd_addr, 1, &def_val, 1) ;
@@ -387,7 +398,6 @@
 	bcu4_testdram(dram_size);
 	printf("%s %d MB of SDRAM\n", __FUNCTION__, dram_size/(1024*1024));
 #endif
+
 	return dram_size;
 }
-
-
diff --git a/board/netstal/hcu5/config.mk b/board/netstal/hcu5/config.mk
index 58ec2af..cfd5744 100644
--- a/board/netstal/hcu5/config.mk
+++ b/board/netstal/hcu5/config.mk
@@ -28,4 +28,3 @@
 ifeq ($(debug),1)
 PLATFORM_CPPFLAGS += -DDEBUG -g
 endif
-
diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c
index 59107b9..23df081 100644
--- a/board/netstal/hcu5/hcu5.c
+++ b/board/netstal/hcu5/hcu5.c
@@ -29,12 +29,34 @@
 
 extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 
-#define mtcpr0(reg, data) do { mtdcr(CPR0_CFGADDR,reg); \
-				mtdcr(CPR0_CFGDATA,data); } while (0)
-#define mfcpr0(reg, data) do { mtdcr(CPR0_CFGADDR,reg); \
-				data = mfdcr(CPR0_CFGDATA); } while (0)
+#undef BOOTSTRAP_OPTION_A_ACTIVE
 
-#define SDR0_CP440			0x0180
+#define SDR0_CP440		0x0180
+
+#define SYSTEM_RESET		0x30000000
+#define CHIP_RESET		0x20000000
+
+#define SDR0_ECID0		0x0080
+#define SDR0_ECID1		0x0081
+#define SDR0_ECID2		0x0082
+#define SDR0_ECID3		0x0083
+
+#define SYS_IO_ADDRESS		0xcce00000
+
+#define DEFAULT_ETH_ADDR  "ethaddr"
+/* ethaddr for first or etha1ddr for second ethernet */
+
+enum {
+	/* HW_GENERATION_HCU1 is no longer supported */
+	HW_GENERATION_HCU2  = 0x10,
+	HW_GENERATION_HCU3  = 0x10,
+	HW_GENERATION_HCU4  = 0x20,
+	HW_GENERATION_HCU5  = 0x30,
+	HW_GENERATION_MCU   = 0x08,
+	HW_GENERATION_MCU20 = 0x0a,
+	HW_GENERATION_MCU25 = 0x09,
+};
+
 
 /*
  * This function is run very early, out of flash, and before devices are
@@ -50,7 +72,6 @@
 {
 	u32 reg;
 
-#undef BOOTSTRAP_OPTION_A_ACTIVE
 #ifdef BOOTSTRAP_OPTION_A_ACTIVE
 	/* Booting with Bootstrap Option A
 	 * First boot, with CPR0_ICFG_RLI_MASK == 0
@@ -64,27 +85,26 @@
 
 	u32 cpr0icfg;
 	u32 dbcr;
-	mfcpr0(CPR0_ICFG, cpr0icfg);
-	if ( ! (cpr0icfg & CPR0_ICFG_RLI_MASK ) ) {
-		mtcpr0(CPR0_MALD,   0x02000000);
-		mtcpr0(CPR0_OPBD,   0x02000000);
-	        mtcpr0(CPR0_PERD,   0x05000000);  /* 1:5 */
-		mtcpr0(CPR0_PLLC,   0x40000238);
-		mtcpr0(CPR0_PLLD,   0x01010414);
-		mtcpr0(CPR0_PRIMAD, 0x01000000);
-		mtcpr0(CPR0_PRIMBD, 0x01000000);
-		mtcpr0(CPR0_SPCID,  0x03000000);
-		mtsdr(SDR0_PFC0,    0x00003E00);  /* [CTE] = 0 */
-		mtsdr(SDR0_CP440,   0x0EAAEA02);  /* [Nto1] = 1*/
-		mtcpr0(CPR0_ICFG,   cpr0icfg | CPR0_ICFG_RLI_MASK);
+
+	mfcpr(CPR0_ICFG, cpr0icfg);
+	if (!(cpr0icfg & CPR0_ICFG_RLI_MASK)) {
+		mtcpr(CPR0_MALD,   0x02000000);
+		mtcpr(CPR0_OPBD,   0x02000000);
+	        mtcpr(CPR0_PERD,   0x05000000);  /* 1:5 */
+		mtcpr(CPR0_PLLC,   0x40000238);
+		mtcpr(CPR0_PLLD,   0x01010414);
+		mtcpr(CPR0_PRIMAD, 0x01000000);
+		mtcpr(CPR0_PRIMBD, 0x01000000);
+		mtcpr(CPR0_SPCID,  0x03000000);
+		mtsdr(SDR0_PFC0,   0x00003E00);  /* [CTE] = 0 */
+		mtsdr(SDR0_CP440,  0x0EAAEA02);  /* [Nto1] = 1*/
+		mtcpr(CPR0_ICFG,   cpr0icfg | CPR0_ICFG_RLI_MASK);
 
 		/*
 		 * Initiate system reset in debug control register DBCR
 		 */
 		dbcr = mfspr(dbcr0);
-		#define SYSTEM_RESET 0x30000000
-		#define CHIP_RESET   0x20000000
-		mtspr(dbcr0, dbcr | CHIP_RESET );
+		mtspr(dbcr0, dbcr | CHIP_RESET);
 	}
 	mtsdr(SDR0_CP440, 0x0EAAEA02);  /* [Nto1] = 1*/
 #endif
@@ -162,60 +182,42 @@
 	return 0;
 }
 
-#ifdef CONFIG_BOARD_PRE_INIT
-int board_pre_init (void)
+int board_pre_init(void)
 {
-	return board_early_init_f ();
+	return board_early_init_f();
 }
 
-#endif
-
-enum {
-	/* HW_GENERATION_HCU1 is no longer supported */
-	HW_GENERATION_HCU2  = 0x10,
-	HW_GENERATION_HCU3  = 0x10,
-	HW_GENERATION_HCU4  = 0x20,
-	HW_GENERATION_HCU5  = 0x30,
-	HW_GENERATION_MCU   = 0x08,
-	HW_GENERATION_MCU20 = 0x0a,
-	HW_GENERATION_MCU25 = 0x09,
-};
-
-int checkboard (void)
+int checkboard(void)
 {
-#define SDR0_ECID0			0x0080
-#define SDR0_ECID1			0x0081
-#define SDR0_ECID2			0x0082
-#define SDR0_ECID3			0x0083
-	unsigned j;
-	uint16_t *hwVersReg    = (uint16_t *) HCU_HW_VERSION_REGISTER;
-	uint16_t *boardVersReg = (uint16_t *) HCU_CPLD_VERSION_REGISTER;
-	uint16_t generation = *boardVersReg & 0xf0;
-	uint16_t index      = *boardVersReg & 0x0f;
-	ulong ecid0, ecid1, ecid2, ecid3;
-	printf ("Netstal Maschinen AG: ");
+	unsigned int j;
+	u16 *hwVersReg    = (u16 *) HCU_HW_VERSION_REGISTER;
+	u16 *boardVersReg = (u16 *) HCU_CPLD_VERSION_REGISTER;
+	u16 generation = *boardVersReg & 0xf0;
+	u16 index      = *boardVersReg & 0x0f;
+	u32 ecid0, ecid1, ecid2, ecid3;
+
+	printf("Netstal Maschinen AG: ");
 	if (generation == HW_GENERATION_HCU3)
-		printf ("HCU3: index %d", index);
+		printf("HCU3: index %d", index);
 	else if (generation == HW_GENERATION_HCU4)
-		printf ("HCU4: index %d", index);
+		printf("HCU4: index %d", index);
 	else if (generation == HW_GENERATION_HCU5)
-		printf ("HCU5: index %d", index);
-	printf (" HW 0x%02x\n", *hwVersReg & 0xff);
+		printf("HCU5: index %d", index);
+	printf(" HW 0x%02x\n", *hwVersReg & 0xff);
 	mfsdr(SDR0_ECID0, ecid0);
 	mfsdr(SDR0_ECID1, ecid1);
 	mfsdr(SDR0_ECID2, ecid2);
 	mfsdr(SDR0_ECID3, ecid3);
 
-	printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n",  ecid0,  ecid1, ecid2, ecid3);
-	for (j=0; j < 6;j++) {
+	printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n", ecid0, ecid1, ecid2, ecid3);
+	for (j = 0;j < 6; j++) {
 		sysLedSet(1 << j);
-		udelay(200*1000);
+		udelay(200 * 1000);
 	}
+
 	return 0;
 }
 
-#define SYS_IO_ADDRESS 0xcce00000
-
 u32 sysLedGet(void)
 {
 	return in16(SYS_IO_ADDRESS) & 0x3f;
@@ -232,9 +234,10 @@
 static u32 getSerialNr(void)
 {
 	u32 *serial = (u32 *)CFG_FLASH_BASE;
-	if (*serial == 0xffffffff) {
+
+	if (*serial == 0xffffffff)
 		return get_ticks();
-	}
+
 	return *serial;
 }
 
@@ -242,45 +245,44 @@
 /*---------------------------------------------------------------------------+
  * misc_init_r.
  *---------------------------------------------------------------------------*/
-
-#define DEFAULT_ETH_ADDR  "ethaddr"
-/* ethaddr  for first or etha1ddr  for second ethernet */
-
 int misc_init_r(void)
 {
 	char *s = getenv(DEFAULT_ETH_ADDR);
 	char *e;
 	int i;
-	u32 serial =  getSerialNr();
+	u32 serial = getSerialNr();
 	unsigned long usb2d0cr = 0;
 	unsigned long usb2phy0cr, usb2h0cr = 0;
 	unsigned long sdr0_pfc1;
 
 	for (i = 0; i < 6; ++i) {
-		gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+		gd->bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
 		if (s)
 			s = (*e) ? e + 1 : e;
 	}
+
 	if (gd->bd->bi_enetaddr[3] == 0 &&
 	    gd->bd->bi_enetaddr[4] == 0 &&
 	    gd->bd->bi_enetaddr[5] == 0) {
 		char ethaddr[22];
+
 		/* Must be in sync with CONFIG_ETHADDR */
 		gd->bd->bi_enetaddr[0] = 0x00;
 		gd->bd->bi_enetaddr[1] = 0x60;
 		gd->bd->bi_enetaddr[2] = 0x13;
-		gd->bd->bi_enetaddr[3] = (serial          >> 16) & 0xff;
-		gd->bd->bi_enetaddr[4] = (serial          >>  8) & 0xff;
+		gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff;
+		gd->bd->bi_enetaddr[4] = (serial >>  8) & 0xff;
 		/* byte[5].bit 0 must be zero */
-		gd->bd->bi_enetaddr[5] = (serial          >>  0) & 0xfe;
-		sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
-			 gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
-			 gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
-			 gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
+		gd->bd->bi_enetaddr[5] = (serial >>  0) & 0xfe;
+		sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
+			gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
+			gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
+			gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
 		printf("%s: Setting eth %s serial 0x%x\n",  __FUNCTION__,
 		       ethaddr, serial);
-		setenv (DEFAULT_ETH_ADDR, ethaddr);
+		setenv(DEFAULT_ETH_ADDR, ethaddr);
 	}
+
 #ifdef CFG_ENV_IS_IN_FLASH
 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
@@ -334,9 +336,9 @@
 	mtsdr(SDR0_USB2H0CR, usb2h0cr);
 
 	/*clear resets*/
-	udelay (1000);
+	udelay(1000);
 	mtsdr(SDR0_SRST1, 0x00000000);
-	udelay (1000);
+	udelay(1000);
 	mtsdr(SDR0_SRST0, 0x00000000);
 
 	printf("USB:   Host(int phy) Device(ext phy)\n");
@@ -356,7 +358,7 @@
  *	certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller *hose)
 {
 	unsigned long addr;
@@ -374,7 +376,7 @@
 	mfsdr(sdr_amp1, addr);
 	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
 	addr = mfdcr(plb3_acr);
-	// mtdcr(plb3_acr, addr & ~plb1_acr_wrp_mask);  /* ngngng */
+	/* mtdcr(plb3_acr, addr & ~plb1_acr_wrp_mask); */  /* ngngng */
 	mtdcr(plb3_acr, addr | 0x80000000); /* Sequoia */
 
 	/*-------------------------------------------------------------------+
@@ -383,7 +385,7 @@
 	mfsdr(sdr_amp0, addr);
 	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
 	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-//	mtdcr(plb4_acr, addr & ~plb1_acr_wrp_mask);  /* ngngng */
+	/* mtdcr(plb4_acr, addr & ~plb1_acr_wrp_mask); */  /* ngngng */
 	mtdcr(plb4_acr, addr);  /* Sequoia */
 
 	/*-------------------------------------------------------------------+
@@ -393,24 +395,23 @@
 	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
 	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
 	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-//	addr = (addr & ~plb0_acr_wrp_mask) ;  /* ngngng */
+	/* addr = (addr & ~plb0_acr_wrp_mask); */  /* ngngng */
 	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; /* Sequoia */
 
-	// mtdcr(plb0_acr, addr); /* Sequoia */
-	mtdcr(plb0_acr, 0);  // PATCH HAB: WRITE PIPELINING OFF
-
+	/* mtdcr(plb0_acr, addr); */ /* Sequoia */
+	mtdcr(plb0_acr, 0);  /* PATCH HAB: WRITE PIPELINING OFF */
 
 	/* Segment1 */
 	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
 	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
 	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
 	addr = (addr & ~plb1_acr_wrp_mask) ;
-	// mtdcr(plb1_acr, addr); /* Sequoia */
-	mtdcr(plb1_acr, 0);  // PATCH HAB: WRITE PIPELINING OFF
+	/* mtdcr(plb1_acr, addr); */ /* Sequoia */
+	mtdcr(plb1_acr, 0);  /* PATCH HAB: WRITE PIPELINING OFF */
 
 	return 1;
 }
-#endif	/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif	/* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init
@@ -476,7 +477,6 @@
 	pci_write_config_word(0, PCI_ERREN, 0);
 
 	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
-
 }
 #endif	/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
 
@@ -523,4 +523,3 @@
 	return 1;
 }
 #endif				/* defined(CONFIG_PCI) */
-
diff --git a/board/netstal/hcu5/init.S b/board/netstal/hcu5/init.S
index 6da5f22..5ab6cd2 100644
--- a/board/netstal/hcu5/init.S
+++ b/board/netstal/hcu5/init.S
@@ -55,7 +55,7 @@
 	tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
 
 	/* TLB-entry for EBC (CFG_CPLD) */
-	// tlbentry( CFG_CPLD, SZ_1K, CFG_CPLD, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+	/* tlbentry( CFG_CPLD, SZ_1K, CFG_CPLD, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) */
 	/* 		CAN */
 	tlbentry( CFG_CS_1, SZ_16M, CFG_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
 	 /* 		IMC + CPLD */
@@ -77,5 +77,3 @@
 	/* TLB for SDRAM will be added by initdram (sdram.c) */
 
 	tlbtab_end
-
-
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c
index f7d6865..4039195 100644
--- a/board/netstal/hcu5/sdram.c
+++ b/board/netstal/hcu5/sdram.c
@@ -216,8 +216,9 @@
 {
 #define	HCU_HW_SDRAM_CONFIG_MASK 0x7
 #define INVALID_HW_CONFIG   "Invalid HW-Config"
-	uint16_t *hwVersReg    = (uint16_t *) HCU_HW_VERSION_REGISTER;
-	unsigned int dram_size=0;
+	u16 *hwVersReg = (u16 *) HCU_HW_VERSION_REGISTER;
+	unsigned int dram_size = 0;
+
 	mtsdram(DDR0_02, 0x00000000);
 
 	/* Values must be kept in sync with Excel-table <<A0001492.>> ! */
@@ -229,15 +230,15 @@
 	switch (*hwVersReg & HCU_HW_SDRAM_CONFIG_MASK) {
 	case 0:
 		dram_size = 128 * 1024 * 1024 ;
-		mtsdram(DDR0_06, 0x0102C80D);  // 128MB RAM
-		mtsdram(DDR0_11, 0x000FC800);  // 128MB RAM
-		mtsdram(DDR0_43, 0x030A0300);  // 128MB RAM
+		mtsdram(DDR0_06, 0x0102C80D);  /* 128MB RAM */
+		mtsdram(DDR0_11, 0x000FC800);  /* 128MB RAM */
+		mtsdram(DDR0_43, 0x030A0300);  /* 128MB RAM */
 		break;
 	case 1:
 		dram_size = 256 * 1024 * 1024 ;
-		mtsdram(DDR0_06, 0x0102C812);  // 256MB RAM
-		mtsdram(DDR0_11, 0x0014C800);  // 256MB RAM
-		mtsdram(DDR0_43, 0x030A0200);  // 256MB RAM
+		mtsdram(DDR0_06, 0x0102C812);  /* 256MB RAM */
+		mtsdram(DDR0_11, 0x0014C800);  /* 256MB RAM */
+		mtsdram(DDR0_43, 0x030A0200);  /* 256MB RAM */
 		break;
 	default:
 		sdram_panic(INVALID_HW_CONFIG);
@@ -245,8 +246,10 @@
 	}
 	dram_size -= 16 * 1024 * 1024;
 	mtsdram(DDR0_07, 0x00090100);
-	// TCPD=200 cycles of clock input is required to lock the DLL.
-	// CKE must be HIGH the entire time.mtsdram(DDR0_08, 0x02C80001);
+	/*
+	 * TCPD=200 cycles of clock input is required to lock the DLL.
+	 * CKE must be HIGH the entire time.mtsdram(DDR0_08, 0x02C80001);
+	 */
 	mtsdram(DDR0_08, 0x02C80001);
 	mtsdram(DDR0_09, 0x00011D5F);
 	mtsdram(DDR0_10, 0x00000100);
diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h
index 8779db9..9e45e90 100644
--- a/include/configs/hcu4.h
+++ b/include/configs/hcu4.h
@@ -312,8 +312,6 @@
 #define CONFIG_PORT_ADDR	0xF0000500
 
 
-
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  *----------------------------------------------------------------------*/
@@ -333,7 +331,7 @@
 
 #define CFG_HUSH_PARSER                 /* use "hush" command parser    */
 #ifdef  CFG_HUSH_PARSER
-        #define CFG_PROMPT_HUSH_PS2     "> "
+#define CFG_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index 87f6948..fa6ca37 100644
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -236,8 +236,6 @@
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
-//	CFG_CMD_FLASH	|
-
 #define CONFIG_COMMANDS (CONFIG_CMD_DFL	|	\
 			CFG_CMD_ASKENV	|	\
 			CFG_CMD_BSP     |	\
@@ -301,7 +299,6 @@
 #define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
 
 /* Board-specific PCI */
-#define CFG_PCI_PRE_INIT		/* enable board pci_pre_init()	*/
 #define CFG_PCI_TARGET_INIT
 #define CFG_PCI_MASTER_INIT
 
@@ -389,4 +386,3 @@
 #define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
 #endif
 #endif	/* __CONFIG_H */
-